|
Select Valve Watering Times
1. Set Program Switch to "A"
2. Move Function Switch to "Set Programs"
3. Turn dial to valve number 1. Use the +/- buttons to enter how long the valve is to water.
4. Repeat step 3 for valve number 2, valve number 3 and so on. Use the +/-
buttons to set unused valves to "Off."
Repeat the above steps if you wish to use Programs "B" and "C."
Dial in Start Time(s)
1. Turn dial to "1st Start Time." Use the +/- buttons to enter the time when you want Program "A" to start.
2. If you want Program "A" to water more than once a day, turn the dial to 2nd Start Time. Repeat
step 1 to enter a second time, or press "-" for off. Repeat for 3rd Start Time. To
shut off start time, press the "+" button until you reach 11:59 PM. Then press "+" button
once more to display "Off."
|
Repeat the above steps if you wish to use Programs "B" and "C."
Dial in Daily Schedule
First, decide whether you want to use the controller's daily schedule (for
example, water every Monday, Wednesday and Friday) or the interval "Skip Days"
schedule (to water every third day, for example, set at 3) to activate your watering cycle.
|
|
Daily Schedule
Dial in Sunday. Use the +\- buttons for "On" or "Off." Repeat this procedure
for each succeeding day of the week. NOTE: When using this schedule, be sure
to set the "Skip Days" setting to "Off."
"Skip Days" Schedule
1. Turn dial to "Skip Days." Use the +/- buttons to set the desired
daily interval (for example, once every 8 days.)
2. Turn the dial to "Today." Use the +\- buttons to set which day in the
cycle "Today" should be, see section 9.0.
Repeat teh above steps if you wish to use Programs "B" and "C."
Set the Clock
1. Turn dial to "Current Time." With the Function Switch still in the "Set Programs"
position, use the +\- buttons to set the current time.
2. Turn the dial to "Today." Use the +\- buttons to select the current day.
3. Return the dial to "Current Time."
Activate the Controller
Activate the programming you have just entered by moving the Function Switch
to the "Run" setting.
How to Check Your Program
Move the Fucntion switch to "Off" and move the Program Switch to whichever
program you wish to check, then turn the dial to the parameter you want to
check. With the Function switch in the "Off" position, you can check, but you
cannot change the programming.
|
