|
"Valve Run Time" Settings
These settings control how long each valve will water. The valve numbers
correspond to the numbered terminals in back of the controller. The valves run
sequentially; when one stops, another begins. You can set each valve to run
from 1 minute to 5.9 hours.
"Start Times" Settings
Up to 3 different start times (time of day) can be selected for each program, up
to 9 start times per day. These settings are especially useful for newly seeded
lawns. NOTE: If a program from one day impinges on another program the
next day, the controller will finish the first program.
"Schedule" Day Settings
Select which days watering is to occur by designating particular days of the week
(for example, watering every Monday and Thursday), or setting skip day
intervals (e.g. watering every 4 days). Days in either mode can be programmed "off."
"Today" Setting
This setting is used with the skip day schedule. For example, if you want to
water every 8 days, and you watered 4 days ago, you would enter the number
4 in the Today setting so that in 4 more days, your newly programmed watering
cycle will begin.
|
